Set Up EZ Winners Lotto ™
Installation
 - Select Set Up
This screen shows your progress toward installation. The main functions are
as follows:
- Download the Program
- Activate the program (this is automatic in most versions of download and
CD)
- Download the Data Bases. (this is a MUST for the program to work)
- Process the Serial Number. (needed for support)
In the event that a process has not been completed the check box will be
open.
When a function has been completed the box will have a Grey Check Mark.
 - Select Process SN to go to the Registration Screen.
- Select Download Data to retrieve lottery data bases from
our web site (be sure you are connected to the internet).
Registration
The registration process requires a user name.
Most information on this Registration screen is displayed for information and
is not modifiable by the user.
The User Name and the generated serial number are requested when you request
support.
 - Enter User Name which is REQUIRED. This must be a name
using alpha characters - NO NUMBERS.
- Then Select Process SN and the serial number will change.
-
- If you fail to enter a User Name prior to Selecting Process SN the
following screen will appear.
-
 - Select OK
When you have properly entered your user name and selected Process SN the
screen will change. This screen will show your Coverage Status and Upgrade /
Update Status. Upgrades refer to Program Upgrades and Updates refer to Data Base
Updates.
 - Download Data Base Update by selecting Update.
- Download Program Upgrades by selecting Upgrade
-
- For either of the above options you must be connected to the internet.
- To close screen Select EXIT
Options
Certain user options may be set either Temporarily or Saved for future
recall.
- Internet Connection -- If you are always connected to internet select
On this eliminates the warning screen.
- Random Numbers* -- It is recommended that this be left On
- Filters* -- Set to On if you wish to be presented with
certain Filter Options
- Step Mode* -- If you do not wish to see the Step Mode when opening a
file Select Off
- Eliminate Numbers in Last Drawing* -- Set to Last 1 if you
wish to eliminate ALL numbers in last drawing from consideration as picks.
- Show or Hide Command Buttons -- Select Show if you want buttons
displayed on start up. Command buttons may be changed from the main screen
whenever you desire.
* Items marked with an asterisk may be changed ONLY at this Options
Screen.
| 
